The final bridge on an All-on-4 is normally made in one of two ways: acrylic teeth on a titanium frame, or a single piece of monolithic zirconia. Set all on 4 acrylic vs zirconia side by side and zirconia keeps its surface for longer, while acrylic is lighter, quieter, gentler on whatever it bites against and far simpler to mend. Neither is a deluxe edition of the other. The right one depends on your bite, on what sits in the opposing jaw, and on whether you would rather accept small repairs along the way or own a bridge that seldom needs them and is a serious job when it does.
| Question | Acrylic teeth on titanium | Monolithic zirconia |
|---|---|---|
| Weight in the mouth | Lighter | Noticeably heavier as an object |
| Wear | The teeth wear and need refreshing | Very little surface wear |
| How it fails | A tooth chips or lifts away, the frame survives | Rarely, but as a crack through the piece |
| Repair | Tooth by tooth, in a laboratory | A new bridge has to be made |
| Sound and feel | Muffled, a little give | Hard, sometimes a small click |
| Against the opposing jaw | Takes the wear itself | Depends on a well-polished surface and a light bite |
Send a panoramic X-ray and one line about your bite: whether you grind, and what you have in the other jaw. Our dentists read those two facts together before recommending a material, and your written plan names it.
What is each bridge actually made of?
An acrylic bridge is really three things joined together. A frame milled from titanium gives the arch its stiffness and connects to the implants. Individual denture teeth sit along that frame, and pink acrylic fills in the gum around them.
A monolithic zirconia bridge is one object, milled from a solid disc, fired in a furnace, then stained and glazed so that one area reads as gum and another as teeth. There is no join between tooth and base.
A structure built from several materials has joins that can fail and parts that can be replaced. A structure built from one has no joins, and nothing to replace short of the whole thing.
Zirconia is much denser than acrylic, so a full arch of it feels heavier in the hand, and you may be aware of it in the upper jaw in the first days. Once it is screwed down the implants carry that weight without difficulty: the load they really have to manage comes from chewing.
Which one wears out, and which one breaks?
Acrylic is soft enough to wear. Over the long term the biting surfaces flatten, the teeth can take up stain, and individual teeth can chip or come away from the base. That is ordinary upkeep, and the frame underneath normally stays sound while the teeth on it are renewed.
Zirconia hardly wears at all and keeps its glaze and colour. It also does not give way. Under a load it cannot absorb it can crack, usually at a thin point: near a screw channel, or in the short section extending behind the rear implant, explained in All-on-4 or All-on-6. In a bridge of adequate thickness with a balanced bite such fractures are uncommon. When one does happen, there is nothing to glue.
Repair when you live a flight away
A chipped acrylic tooth is a modest laboratory job, and a dentist at home can often arrange it once the bridge has been unscrewed, provided they have the screw specification from your treatment record. A fractured zirconia bridge has to be remade, which normally means returning to the clinic. Ask what happens to your provisional once the final bridge is fitted: one that has been kept can sometimes be screwed back on as a stopgap.
Does the material feel or sound different when you eat?
Yes. Implants have no ligament around them to cushion a bite, so a hard contact travels straight into the bone and you hear it through the jaw. Acrylic damps some of that: biting into a crust of toast on acrylic teeth is a dull, muffled event. Zirconia is hard material on hard material, and contact against another hard surface can produce a small, clear click. Many people stop hearing it. If noises inside your own head bother you, tell us, because that is a legitimate reason to lean towards acrylic.
How do the opposing jaw and grinding change the choice?
Against natural teeth or ordinary crowns, a well-polished zirconia surface is not especially abrasive, but a patch left rough after adjustment will wear whatever meets it, while acrylic takes the wear on itself. When both jaws are being rebuilt, zirconia against zirconia wears least and has the least give, and acrylic against acrylic is quiet and wears on both sides.
Grinding pulls in two directions. It wears acrylic teeth quickly, which is why monolithic zirconia is the usual answer for a heavy bite. But zirconia passes more of that force on to the screws and implants, so the bite on a rigid bridge has to be kept light, particularly in sliding movements. Whether a night guard is part of your case is stated in your plan, and what the habit does to ceramic work is covered in teeth grinding and crowns.
Unsure what you are biting against, or whether you grind? Send photographs of your teeth closed together on WhatsApp at +355 69 691 1118 and our dentists will tell you which of these questions applies to you.
Why is the bridge you wear during healing made of acrylic?
Whichever material you end up with, the provisional bridge is acrylic, and the reasons are practical. While the implants are knitting into the bone, acrylic gives a little instead of passing every knock to them. The gum beneath changes shape over the healing months, and acrylic can be altered to follow it, which zirconia cannot. It is also the sacrificial part: if you bite something you were told to avoid, the provisional is what should crack, and the healing implant is what should be spared.
It is a rehearsal as well: over those months you learn how the tooth length, the lip support and certain sounds feel to you, and the way the provisional wears is evidence about your bite. The first visit is 5–7 days and the second, for the final bridge, is 2–3 days, 3–6 months later. The stages are described on the All-on-4 dental implants page.
All on 4 acrylic vs zirconia: how much does the material change the price?
All-on-4 here is 5,000–7,000 euro per arch, provisional and final bridge included. As the All-on-4 cost page explains, a bridge of acrylic teeth on a titanium frame sits at the lower end of that range and a monolithic zirconia bridge at the upper end. We do not publish a separate figure for the material in an article, because the total depends on your arch. The written quote names the bridge material, so you can see exactly what is being priced.
A quote that says only “final bridge” cannot be compared with anything, so ask what it is made of. And do not read the lower end as the inferior choice: for a moderate bite against natural teeth, acrylic on titanium can be the sounder engineering. How a quote is built is set out in how your quote works.
FAQ
Which one is easier to keep clean?
Zirconia has the advantage at the surface: a glazed ceramic gives plaque and stain little to hold on to, whereas acrylic is more porous and can pick up odour if cleaning slips. The underside is where both designs succeed or fail, though, and there the routine is identical: small interdental brushes, a threaded floss and a water flosser, every day, along the line where the bridge meets the gum. A smoother material does not clean itself, and inflammation around an implant takes no interest in what the bridge is made of. Ask to be shown the routine on your own bridge.
Can I have acrylic first and change to zirconia later?
Usually, because the implants stay where they are and a new bridge is made on them. It is a second laboratory project with its own cost, designed around your gums and bite as they are at that point. Trying out a new bite on a forgiving material before committing to a rigid one is a sensible reason. Postponing a decision that the scan could settle early is a poor one. If you think you may want to change, say so at the planning stage.
Will a zirconia bridge look more natural than acrylic?
Either can look convincing, and the laboratory’s hand matters as much as the material. Stained and glazed zirconia keeps its finish and resists the coffee and tea that gradually discolour acrylic. Acrylic teeth often have a softer look when new, and the pink base can be matched closely to your gums. What ages the appearance differs: acrylic dulls and its biting edges flatten, while zirconia changes very little, even as any natural teeth in the other jaw go on changing. If there is a shape you would like to return to, send an older photograph of your smile with your X-ray.
How does the written guarantee treat the two?
The bridge is prosthetic work, covered for 5 years in writing, and the implants carry their own 5-year term, each with conditions and exclusions. The line to read carefully is the one between a defect and ordinary wear, because acrylic teeth wear by nature, and the plan lists which is which. Travel and accommodation for any return visit are yours. The terms are summarised on the guarantee and aftercare page.
Use the quote form to send your panoramic X-ray, a note of which jaw is being treated, what is in the opposing jaw and whether you grind. You receive a written treatment plan with detailed pricing that names the bridge material for your arch, with no obligation.
