E-max and zirconia are both tooth-coloured ceramics, and the likeness ends there. E-max, a lithium disilicate glass ceramic, lets light through and can be bonded to enamel, which is what a thin veneer depends on. Zirconia is considerably stronger and more opaque, which is what a crown on a loaded or darkened tooth needs. In the E-max vs zirconia veneers question, the useful answer is usually that the veneer should be E-max, and that a tooth which truly needs zirconia needs a crown.
| E-max (lithium disilicate) | Zirconia | |
|---|---|---|
| What it is | A glass ceramic: fine crystals grown through glass | A crystalline oxide ceramic with no glass in it |
| Light | Passes through, much as it does through enamel | Mostly scattered; more opaque even in the newer grades |
| How it stays on | Etched and bonded to enamel | Cemented, held largely by the shape of the prepared tooth |
| Strength | Ample for a bonded veneer or a single front tooth | Much higher: suits molars, bridges and heavy bites |
| Hiding a dark tooth | Partly, and only by adding thickness | Yes |
| On our price list | Veneers, 200–350 euro each | Crowns, 150–250 euro each |
Send a close photograph of the teeth in daylight and say which of them have fillings or root canal treatment. Our dentists will reply with the material each tooth calls for, and why.
What are E-max and zirconia, as materials?
E-max is the name most people use for lithium disilicate. Picture a glass with a dense mesh of needle-shaped crystals grown through it. The glass is what lets light travel into the material and back out, the way it does in enamel. The crystals are what stop a crack from running. The result is pressed or milled to shape, then coloured and glazed.
Zirconia is zirconium dioxide, a white crystalline ceramic. Despite the metallic-sounding name there is no metal framework involved. It is milled from a disc while still soft and chalky, then fired in a furnace, where it shrinks and hardens into one of the toughest materials used in the mouth. It contains no glass, so light is scattered inside it instead of passing through, and that is why it looks denser. Newer grades are more translucent, and they pay for it with some of their strength.
Why does bonding decide the veneer question?
A crown wraps round a tooth and is held partly by its own shape. A veneer is a shell on one face. Take away the adhesive and nothing keeps it there.
The inner surface of a glass ceramic can be etched with acid, which dissolves a little of the glass and leaves a microscopic texture. A resin cement locks into that texture on one side and into etched enamel on the other. Once set, shell and tooth behave as a single piece, and that is how something half a millimetre thick survives years of biting.
Zirconia has no glass to etch. It can be bonded by other means, with surface treatment and special primers, and the methods have improved, but the result is more sensitive to how each step is carried out. For a restoration that relies on its bond and on nothing else, we prefer the ceramic whose bond is the more dependable.
Then why are zirconia veneers offered at all?
They exist, and it would be wrong to pretend otherwise. Some laboratories mill thin shells from the translucent grades of zirconia. The arguments for them are strength and the ability to cover a dark tooth, and for a clinic there is the convenience of making everything from one material.
The trade-offs are the ones the material brings with it. To look natural, zirconia needs either more thickness, which means more tooth removed, or a layer of porcelain on its surface, which adds a part that can chip. The bonding question above stays open.
There is also the matter of labels. On many quotes, a zirconia veneer turns out to be a tooth reduced all the way round and capped. That is a crown, whatever the line on the invoice says. The test is simple: is only the front face being prepared, or every surface? The page on veneers or crowns explains why that distinction outweighs the choice of ceramic.
Why does our price list have E-max veneers and zirconia crowns?
Because each material is used where its weakness does not show. A veneer is thin, bonded and sits on teeth where light matters, so our porcelain veneers are E-max at 200–350 euro each. A crown covers a tooth that has lost structure or carries real load, so our zirconia crowns are 150–250 euro each. For comparison, the UK figures are typically £500–1,000 for an E-max veneer and £400–800 for a zirconia crown.
Notice which of ours is the lower figure. There is no commercial reason for us to turn a crown into a veneer or a veneer into a crown, and the plan names one or the other for each tooth by number. Where a tooth cannot be done well with an E-max veneer, our answer is a zirconia crown on that tooth, described as a crown.
Which teeth planned for a veneer are better served by a zirconia crown?
A dark, root-filled tooth
After root canal treatment a front tooth often darkens from the inside. A thin translucent veneer lets that grey show through, the very property that makes it look natural on a healthy tooth. The tooth is also more brittle than its neighbours. A zirconia core blocks the colour and holds the tooth together from all sides.
Front teeth worn down by heavy grinding
Where the edges are already flat and short, a veneer would put its thinnest part under the highest load. The reasoning is set out in teeth grinding and crowns.
A tooth that is mostly filling
A veneer needs enamel to bond to. A front tooth with large old fillings on its face and sides offers very little, and a bond to filling material is weaker than a bond to enamel. A crown does not depend on that surface.
None of these is automatic. A living tooth that is only slightly dark can often still take E-max, made a touch thicker or from a more opaque grade. The decision is made tooth by tooth, from photographs and an X-ray together.
If you already hold a quote that mixes veneers and crowns, or names zirconia veneers, send it on WhatsApp to +355 69 691 1118 with a photograph of your smile. You will be told what each line is likely to mean for the tooth.
How is a mixed plan matched for colour?
Six E-max veneers beside two zirconia crowns is an ordinary plan, and the usual worry is that two materials will look like two materials. Four things prevent it.
First, they are made together, as one set, and judged side by side before they leave the laboratory bench. Second, a zirconia crown on a front tooth is not bare zirconia: it has a zirconia core with ceramic layered on its visible face, so the surface that meets the light has the same gloss and texture as the veneers next to it. Third, the colour of the prepared tooth under each piece is recorded, because E-max shows a little of what lies beneath it and zirconia shows none, and the technician adjusts the opacity of one and the core shade of the other to meet in the middle. Fourth, everything is tried in together before anything is bonded, and daylight is the light to judge it in.
There is a limit, and it should be stated. In unusual light, strong backlighting for instance, a trained eye may catch a difference. Across a table, no.
One sequencing point: ceramic does not respond to whitening. If the lower teeth are to be lightened, teeth whitening comes first and the shade is taken afterwards.
FAQ
Zirconia is stronger, so will it last longer?
Stronger on a test bench, yes. In the mouth, a veneer almost never fails because the ceramic was too weak in the middle. It fails at the biting edge or at the bond, and those depend on the bite, on grinding and on how much enamel was kept. A stronger shell with a less dependable bond is no gain. What moves a veneer’s working life, in years, is covered in how long veneers last.
Can E-max be used on back teeth?
On premolars, often. They show in a wide smile and frequently take veneers along with the front teeth, provided the bite on them is moderate. Molars are different: they do the heavy chewing, a molar that needs restoring usually needs full coverage, and solid zirconia is the sensible material for it. So a plan can quite properly read E-max from premolar to premolar and zirconia behind, and nobody will see the change.
Another clinic has quoted me zirconia veneers. What should I ask?
Three things. Which surfaces of each tooth will be reduced, and by how much. How thick the finished piece will be. Whether it will be bonded or cemented. If the answer to the first is every surface, you are being quoted crowns. That may be right for a damaged tooth and it is too much for a healthy one. You can send the quote to us for a written second opinion before deciding.
Will an E-max veneer cover the colour of my teeth?
It depends how far the colour has to move. General yellowing or mild greyness is well within reach, using a less translucent grade and slightly more thickness. A single tooth that has turned dark grey or brown is another matter, because hiding it with a veneer means making the veneer thick and opaque, and at that point it stops looking like its neighbours. That tooth is usually the one the plan marks for a crown.
Does either material irritate the gum?
Both are metal-free ceramics and both are well tolerated by gum tissue. When gums around ceramic work become red or tender, the cause is nearly always the margin: an edge that sits too deep, a small ledge that traps plaque, or cement left behind. Material choice does not fix a poor margin, and a good margin makes either material comfortable. Ask how the edges will be finished, and clean along the gum line every day.
Use the quote form to send your photographs, a panoramic X-ray if you have one, and any quote you have been given. You receive a personalised written treatment plan with detailed pricing within 24 hours, naming E-max or zirconia tooth by tooth, with no obligation.
